- Lithograph limited to 400 pieces
- Each lithograph is numbered
- Shipping Weight: 36oz
- Material: Uses a special pearl gloss on the Mass Effect logo for added vibrance.
- Size: 24” x 18” (60.96 x 45.72 cm)
MASS EFFECT WILL CONTINUE…
And with the sneak peek poster we got from the BioWare team as part of the N7 Day 2021, there is a lot to unpack.
The special pearl gloss finish and high-quality printing ensure that no detail is lost, right to the specks of dust and snow.
So, suit up, hang this lithograph on your wall and get ready for the next chapter in Mass Effect
Due to differences between monitor displays, your lithograph may vary from the images shown.
Please Note: This lithograph is shipped rolled, in a tube, to reduce the chance of damage during shipping. See the bottom of the description for options to flatten your lithograph.
FLATTENING YOUR LITHOGRAPH
To flatten your lithograph, the following measures may be taken.
Unroll your lithograph and lay it between 2 boards that are larger than the print. Make sure the boards are clean or sandwich your print between tissue paper. Place heavy items evenly across the top of the boards. Leave as long needed to flatten the print.
You can lightly iron your lithograph on a flat and heat resistant surface. Set your iron to the lightest setting first. You must place either a pressing cloth or towel between the iron and the print. Otherwise, you will burn your print. It is advised that you have the print face down when ironing. Gently press your iron on the cloth and print, moving back and forth only on the cloth until the area is flat. Do this across the entire print. If you feel the iron is not hot enough gently increase the temperature until the desired effect is achieved.
Take your print to a professional framing service and have them frame or mount it on a board.
The BioWare Gear Store will not be held liable if you damage your print using the above methods. These are merely options to help you get the most out of your lithograph.
- Mass Effect art: Lithograph